TALOS DR04 User Manual Download Page 37

Page: 37 / 119

Digital Video Recorder User Manual

4.6 Alarm Configuration

Enter into Main Menu



Setup



Alarm. Alarm configuration includes five submenus:

sensor, motion, video loss, other alarm and alarm out.

4.6.1 Sensor

Sensor includes three submenus: basic, alarm handling and schedule.

1. Basic

Refer to Fig 4-20. User can enable sensor alarm of alarm input; select the alarm type

according to alarm trigger type: N.O. (normally open) and N.C. (normally closed).

Fig 4-20 alarm configuration-sensor-basic

Select

“all” and then do relevant setup, user can set all channels with same

parameters.

Click “Default” button to

estore the default setting; click “Apply” button to save the

setting; click “Exit” button to exit current menu.

2. Alarm Handling

Refer to Fig 4-21. Select the holding time of sensor alarm; click

“Setting” button to pop

up a window, refer to Fig 4-22:

Summary of Contents for DR04
























































































































Search results

Summary of Contents for DR04

Reviews:

Related manuals for DR04

Brands by name

Popular brands

TALOS DR04, User Manual

Search results

Summary of Contents for DR04

Reviews:

Related manuals for DR04

Brands by name

Popular brands