TALOS DR04 User Manual Download Page 109

Page: 109 / 119

Digital Video Recorder User Manual

Q6. Cannot record

a. Can't format HDD. Please format it manually first.

b. Can't enable record function or incorrect setup. Please refer to 4.3 Record

configuration and 4.4.1 Schedule.

c. HDD is full and not enables recycle function. Chang a new HDD or enable recycle.

Please refer to 4.3.5 Recycle record.

d. The HDD is damaged. Change a new one.

Q7. Cannot use mouse

a. Please wait 1-2 minutes after mouse connected.

b. Not detected. Plug/unplug several times.

c. The mouse is incompatible. Please change a compatible mouse.

Q8. Cannot download ActiveX control

a. IE browser blocks ActiveX. Please proceed as follows:

Open IE browser, then click Tools



Internet Options…;

Select Security tab



Custom Level…; Refer to Fig 8-1:

Enable all the sub options under “ActiveX controls and plug-ins”; refer to Fig 8-2:

Click OK to finish setup;

b. Other plug-ins or anti-virus software blocks ActiveX. Please uninstall or close

them.

Summary of Contents for DR04
























































































































Search results

Summary of Contents for DR04

Reviews:

Related manuals for DR04

Brands by name

Popular brands

TALOS DR04, User Manual

Search results

Summary of Contents for DR04

Reviews:

Related manuals for DR04

Brands by name

Popular brands