TALOS DR04 User Manual Download Page 43

Page: 43 / 119

Digital Video Recorder User Manual

Fig 4-30 video loss-trigger

4.6.4 Other Alarm

Step 1:

Refer to Fig 4-31, select the alarm type, set the trigger options. When the

selected alarm is triggered, it will trigger the relevant alarm.

Fig4-31 alarm configuration-other alarm

Select

“Disk Full”: set a threshold value for remaining HDD space. If the threshold

value is reached, the system will display a prompt.

Select

“IP Conflict”: when IP address conflicts with other network device’s IP address

on the same segment, the system will trigger alarm prompt if you have set the trigger

options.

Select

“Disconnect”: the system will trigger alarm prompt if you have set the

trigger options when disconnected from the network.

Select

“Disk Attenuation Warning”: trigger the relevant alarm when HDD is bad.

Select

“Disk Lost”: trigger the relevant alarm when HDD dropped off.

Summary of Contents for DR04
























































































































Search results

Summary of Contents for DR04

Reviews:

TALOS DR04, User Manual, Page: 43 / 119

Search results

Summary of Contents for DR04

Reviews: