Introduction
User guide
2
About this manual
The user guide contains a detailed description of the printer, its charac-
teristic features and additional information.
`
Chapter 1
Printer at a glance
lists all the parts of the printer.
`
Chapter 2
Installation
contains start-up instructions and points to note.
`
Chapter 3
Inserting the ribbon cassette
provides step-by-step instruc-
tions for changing the ribbon cassette.
`
Chapter 4
Printer drivers
provides step-by-step instructions for instal-
ling the printer driver.
`
Chapter 5
The control panel
explains how to control printer operations.
`
Chapter 6
Paper handling
tells you how to set the paper type and how
to load, transport and move the paper to the tear-off position.
`
Chapter 7
Settings
tells you how to adjust the basic settings such as
font, character density, print head distance, print line height and tear-
off position.
`
Chapter 8 describes how to handle the rear tractor, which is only
available and permanently installed in the 2T printer model.
`
Chapter 9
The Menu
contains all the information necessary for con-
trolling the printer via the control panel.
`
Chapter 10
Advanced menu
describes the possible test settings and
other technical adjustments of the printer.
`
Chapter 11
Troubleshooting
provides instructions for rectifying faults
which do not require the intervention of qualified personnel.
`
Chapter 12
Care and maintenance
provides information on the upkeep
of the printer.
`
Appendix A
Specifications
informs you about the technical specificati-
ons of your printer and the paper which should be used.
`
Appendix B
Character sets
lists the available MTPL character sets.
`
Appendix C
Emulations
deals with programming via the interface. The
available programming sequences are listed.
`
Appendix D
Interfaces
explains the interfaces.
`
Appendix E
Options and accessories
contains information about opti-
ons and accessories you can purchase for your printer.
