User guide
Options and accessories
165
Options and accessories
Options
The following options can be ordered for your printer.
Automatic cut sheet feeder,
front (ASF-F)
The automatic sheet feeder is suitable for single sheets. Paper for-
mats with a width of 150 to 365 mm may be used. Each format in
between can be set. The cut sheet feeder cannot be used in con-
junction with the optional tractor front.
Part no.: 061 906
Automatic cut sheet feeder,
rear (ASF-R)
The automatic sheet feeder with two bins is suitable for single
sheets. Paper formats with a width of 100 to 368 mm may be used.
Each format in between can be set. The single sheet feeder can only
be installed on the standard printer. It cannot be used in conjunction
with the autocut facility.
Part no.: 061 905
Autocut facility
An additional module for automatic cutting (cannot be used in con-
junction with the automatic cut sheet feeder [ASF-R]).
Part no.: 061 907
Tractor 2, front
The push tractor is suitable for fanfold paper. You can use paper for-
mats with a width in the range from 76 to 406 mm; you can set any
intermediate format.
Part no.: 061 052
Face down insertion
An additional module for the automatic single sheet feeder. The sin-
gle sheets are output with the face down.
Part no.: 061 908
Printer pedestal
A cabinet to be used as a printer stand and for storing fanfold paper
stacks.
Part no.: 061 910
E
