Tally Dascom 7010, Maintenance Manual

Page: 68 / 255

2-3. Operation Panel
2-52
9. To check other submenu, repeat from Step 3. Otherwise, turn off the power to
terminate Factory/Service mode.
Operation procedure for “Service Counter” submenu:
1. Enter Factory/Service mode by turning on the power while pressing and holding the
[MENU]
,
[FEED]
and
[STOP]
keys.
“Factory Setup” main menu appears.
2. Press the
[MENU]
( T ) or
[FEED]
( S ) key until “Service Mode” main menu appears.
3. Press the
[STOP]
(
X
) key to enter Service mode.
4. Press the
[MENU]
( T ) or
[FEED]
( S ) key until “Service Counter” submenu appears.
5. Press
the
[STOP]
( X ) key to select “Service Counter” submenu.
Then, the service counter length since the service counter is reset last is displayed.
* To reset the service counter, proceed to the next step. Otherwise, proceed to Step 7.
6. Resetting the service counter:
1) Press the
[STOP]
(
X
) key.
2) Press the
[MENU]
( T ) or
[FEED]
( S ) key and select “Yes”.
3) Press the
[STOP]
(
X
) key to perform resetting.
7. Press the
[PAUSE]
( W ) key to return to “Service Mode” menu.
8. To check other submenu, repeat from Step 3. Otherwise, turn off the power to
terminate Factory/Service mode.
W X
Service
Counter
Exit Enter
S
T
W X
Length
0123.456 km
Exit Enter
S
T
W X
Reset?
No
Exit Enter
S
T
W X
Reset?
Yes
Exit Enter
S
T