Tally Dascom 7010, Maintenance Manual

Page: 14 / 255

1-3. Printing Position Accuracy
1-10
1-3. Printing Position Accuracy
By default, the printing start position is 2.5 mm (0.10") from the left end of the media and 1 mm
(0.04") backward the leading edge of the label, U-shaped notch, or black mark.
2.5 mm (0.10") is the necessary value to avoid printing in the unprintable area as mentioned in 1-2
"Printable Area".
The printing start position will deviate from the ideal position as follows:
*1: Actual printing start position. May deviates from the ideal one in the indicated range.
*2: Deviation of vertical positioning when printing position is set to 0.
*3: Deviation of horizontal positioning when printing position is set to 0.
*4: Deviation of vertical printing position when 100 mm is specified from the printing start
position.
1
±
2 mm*
2
(0.04
±
0.08")
Reference edge
(Paper guide)
Printable area
Direction of media feed
Ideal printing start position
Actual printing start position*
1
2.5
±
1 mm*
3
(0.10
±
0.04")
100
±
2 mm*
4
(39.4
±
0.08")
Maximum media width: 118 mm (4.65")
U
npri
n
tabl
e ar
ea
2.5 mm
(0.10")
1 mm (0
.04"
)
U
n
p
ri
n
tabl
e are
a