Tally Dascom 7010, Maintenance Manual

Page: 59 / 255

2-3. Operation Panel
2-43
(2) How to print the Factory Mode Settings menus
You can print the current factory mode setting values in the following two ways.
Method 1:
While pressing and holding all keys (
[MENU]
,
[FEED]
,
[STOP]
and
[PAUSE])
, turn on the
power.
The current factory mode setting values are printed, and then the printer enters the
Factory mode.
To exit from the Factory mode:
Press the
[PAUSE]
( W ) key.
Method 2
Enter the Factory/Service mode and print the configuration settings.
1) Enter the Factory/Service mode by turning on the power while pressing and holding the
[MENU]
,
[FEED]
and
[STOP]
keys. (Refer to “ (1) How to enter Factory/Service Mode ”
mentioned earlier.)
2) Press the
[MENU]
(
T
) or
[FEED]
(
S
) key until “Test Mode” main menu appears.
3) Press the
[STOP]
( X ) key to enter the Test Mode.
4) Press the
[MENU]
(
T
) or
[FEED]
(
S
) key until “Print Pattern” submenu appears.
5) Press the
[STOP]
( X ) key to enter the Print Pattern submenu.
6) Press the
[MENU]
( T ) or
[FEED]
( S ) key and select “Current Config”.
7) Press the
[STOP]
(
X
) key to print the configuration settings.
The current factory mode setting values are printed.
To exit from menu mode:
Press the
[PAUSE]
( W ) key until the printer exits from the “Test Mode” main menu.