C o n f i g u r i n g T a l k S w i t c h
7 5
Enter the dialing prefix including any required pauses or feature keys such as
or
. The corresponding key for inserting a 2-second pause is the comma. For
example, if you want to disable Call Waiting and want to dial a long distance prefix
before dialing the long distance number you could enter the following:
*70,1010555,, This corresponds to
70 for disabling the Call Waiting feature, a
2 second pause to wait for the new dialtone, then 1010555 for the long distance
prefix, and a 4 second pause to wait for the new dialtone before dialing the actual
long distance phone number.
This saves you the hassle of having to enter the same prefix every time you want to
set up an Auto Call Back phone number.
Number used to trigger Auto Call Back:
Select the line/phone number that you will be dialing when out of the office to
trigger this Auto Call Back. TalkSwitch will initiate the Call Back using the same line
you initially called. You can make configuration changes to this Auto Call Back by
dialing into this phone number only.
Use Password on Call Back:
This option is designed to give you security and to restrict who can use this
particular Call Back number. Simply fill in a 4- to 8-digit password for the Call Back.
When TalkSwitch calls you back, you will be prompted to input the password to
accept Call Back.
Use Announced Message:
This option is recommended if the number TalkSwitch will be calling back is to a
hotel or a location where somebody else will be answering the call. The Announced
Message option allows you to record a message that plays when the call is initially
answered during a Call Back. For example, you may want to say “Please transfer this
call to Bob in room 307”.
The Announced Message can be recorded locally using an extension handset or
remotely by accessing Call Back from the Auto Attendant. The Record message
button gives the instructions as follows:
Pick up a telephone handset connected to the TalkSwitch and use the following
keypad commands to record the specific Auto Call Back Announced Message:
1.
Press
to enter command mode. If required, enter the password.
*
#
*
#
