1 2 6
T a l k S w i t c h U s e r G u i d e
Touch-tone features dialed from a Local Extension
Command
Function performed
Notes
1x1-1x8
Intercoms a Local Extension
x represents the Unit ID
2x1-2x8
Dials a Remote Extension (associated
with an external phone number).
x represents the Unit ID
250-299
Speed dial for VoIP calls. TalkSwitch
will hunt the VoIP ports, go off hook
then dial the digits entered.
300-309
Dials an Extension Ring Group. 10 in
total for the entire system. Mapped to
local extension(s), with specific fall
through options.
<flash> if
connected
to a caller
Puts caller on hold.
After putting a caller on hold, you receive
internal dialtone
<flash> at
internal dialtone
It retrieves the most recent caller put
on hold.
To retrieve the caller on hold for the most
time, dial 7 at internal dialtone.
<flash> at
external dialtone
Switches to internal dialtone. Used
mainly when an extension has Direct
Line Access enabled.
1x1-1x8
2x1-2x8
4x0-4x9
Dials into a local ext. voice mailbox.
Dials into a remote ext. voice mailbox.
Dials into a general ext. voice mailbox.
To transfer a caller to a mailbox, press
‘flash’ to place a call on hold, then
1x1-1x8,
2x1-2x8, or
4x0-4x9 and hang up.
x represents the unit ID
1x1-1x8
2x1-2x8
4x0-4x9
Internal voicemail retrieval/access.
accesses the mailbox
associated to that extension.
To retrieve voicemail.
x represents the Unit ID
<flash>4
Completes a transfer and returns to
internal dialtone.
Action performed after putting a caller on
Hold then dialing an intended destination.
0
External P.A. Access
To make an announcement through the
attached external P.A. system.
*
*
*
*
*
*
* *
* *
* *
* *
#
* *
#
*
