1 6
T a l k S w i t c h U s e r G u i d e
2.5.3
Changing the Unit ID
If you need to change the Unit ID of any TalkSwitch system, you can first press
from a Local Extension to enter command mode, enter a password if necessary, then
dial 0 0
. The system will respond with the Unit ID of that particular TalkSwitch.
To change the Unit ID, use any of the following commands once in command mode:
2.5.4
Unit IDs and how they affect system extension numbers
When more than one TalkSwitch is connected to a LAN and they operate in networked
mode, the extensions and voicemail have different numbers based on the Unit ID
assigned to the TalkSwitch unit they belong to.
The extensions and voice mailboxes affected by the new numbering system are listed
in the following table.
None of the Extension Ring Groups are affected, since they are global to the entire
system. It doesn’t matter if there is one or four TalkSwitch units on a LAN, there will
always be 10 Extension Ring Groups with the extension numbers 300-309.
Unit ID
Touch Tone Command
1
01
2
02
3
03
4
04
Unit ID 1
Unit ID 2
Unit ID 3
Unit ID 4
Local Extensions
111-118
121-128
131-138
141-148
Remote Extensions 211-218
221-228
231-238
241-248
Local Mailboxes
111-118
121-128
131-138
141-148
Remote Mailboxes
211-218
221-228
231-238
241-248
General Mailboxes
410-419
420-429
430-439
440-449
#
#
#
#
#
#
