Takeuchi TCR50, Operator'S Manual

Page: 67 / 166

65
OPERATION
Before Starting Operation
Before Starting the Engine
1. Adjust the seat for a comfortable operating
position.
2. Fasten your seat belt.
3. Check that the safety lock lever is in the
locked position.
4. Check that the control levers are in the
neutral position.
5. Insert the key into the starter switch, turn
it to the ON position, then perform the
following inspection :
• All the warning lamps flash and an alarm
sounds for 2 seconds. The meters also
start functioning. After 2 seconds, only
the battery charge warning lamp (3) and
engine oil pressure warning lamp (4)
flash, and the other lamps turn off.
• Turn the light switch to check that the
front lights, rear light and meter light turn
on.
• Operate the turn switch and check
whether the turn lights flash and the
alarm sounds.
• Press the horn switch to check that the
horn sounds.
• Check the fuel level.
If a lamp does not light or the alarm does not
sound, the bulb may be burnt out or a wire
may be damaged. Contact a Takeuchi sales
or service outlet for repairs.
S2B015
S2D002
OFF
ON
START
L3D001