Takeuchi TCR50, Operator'S Manual

Page: 92 / 166

90
MAINTENANCE
* : If the percentage of the traveling time within the total operating time is high, replace the
gear oil earlier than the specified time.
** : For water, use tap water (soft). Do not use well or river water.
When the ambient temperature drops below 0°C, add coolant (antifreeze). Follow the
coolant manufacturer’s instructions to determine the mixture ratio.
Service Data
Lubricant and Fuel Chart
Use different lubricants, greases and fuels according to the temperature, referring to the chart
below.
�
Change the lubricant earlier than as shown in the table if it is extremely dirty or its performance
has deteriorated severely.
�
Whenever possible, use the same brand of lubricant as before. If changing with a different
brand, replace the entire quantity – do not mix different brands.
Lubricants and greases
Part Type
Type by temperature
-22 -4 14 32 50 68 86 104 °F
-30 -20 -10 0 10 20 30 40 °C
Replacement
interval
Capacity
L (US. qt.)
Engine
oil pan
Diesel engine
oil
API-CF-4
After first 50 hrs.
Every 250 hrs.
Upper limit:
15 (15.9)
Lower limit:
9 (9.5)
System: 57
(15.1 US.gal.)
Tank: 36
(9.5 US.gal.)
Hydraulic
tank
Antiwear
hydraulic oil
(Option:
Biodegradable
oil)
Every 1000 hrs.
Engine
cooling
system
Coolant
(water +
coolant) **
Every 1000 hrs. 15 (15.9)
Travel
reduction
gear
Gear oil
API-GL-4
SAE 90
After first 250
hrs.*
Every 1000 hrs.
Slew
bearing
Dump body,
Track roller
Levers
Lithium
based
grease
EP-2
NLGI No. 2
Every 50 hrs.
Daily or every
10 hrs.
When required
As required
2.6 (2.75)
SAE 5W-20
SAE 10W-30
SAE 15W-40
ISO VG32
ISO VG46
ISO VG68
50% coolant mixture
30% coolant mixture