Takeuchi TCR50, Operator'S Manual

Page: 62 / 166

60
CONTROLS
Accessories
3. For more stations, repeat the steps (1) and
(2) above.
�
If the preset button on which a station
has been set to is pressed and held
for two seconds or more, the preset
information will be modified.
�
If the stored information is erased
during battery replacement on the
vehicle, set the stations again to the
preset buttons.
�
Each preset button can store
information on one FM station and one
AM station.
Auto storing
Press the AST button for two seconds or
more while playing the radio. The radio
starts seeking the audible stations within the
band selected, store the information on the
stations obtained into memory, and assign
each preset button (1 to 6) a station. Note:
The previous station setting stored in memory
will be overwritten. If the arrangement of the
preset buttons to the corresponding stations
is not desirable, try the “Presetting stations”
described above.
AUX audio connection
�
Connect a favorite headphone stereo set
to enjoy music on the radio, or connect
a portable audio player and listen to your
favorite music.
�
Plug a patch cord (without resistor) into
the headphone jack of the audio player.
�
Plug a stereo mini plug (3.5 mm) into the
AUX-IN jack on the radio.
�
To listen to the audio player, press the AUX
button. (The AUX display appears and the
frequency display is changed to the clock
display.)
�
To return to the radio, press the AUX
button again.
�
When connecting, adjust the sound
volume level of the audio player so that it
is same as that of the radio.
�
Adjust the sound volume of the audio
player by using the volume control buttons
on the radio.
�
Do not connect a device with a larger
output compared with a portable audio
player.
Setting the clock time
�
Be sure that the time is displayed on
the LCD. If not, press the AUX button to
display the time.
�
Use the tune button to set the minute.
Use the tune button to set the hour.
�
To set the minute digits to “00” when they
are from “55” to “59” or from “01” to “05”,
press the ZERO button.
Resetting the radio
If there are any problems, such as the
abnormal display of frequency or failure of
selection, reset the radio by pressing the
power button and the ZERO button together.
Note that the memory containing the clock
setting and the channel setting is cleared
after reset.
AUOC002