Takeuchi TB23R, Operator'S Manual

Page: 131 / 190

129
MAINTENANCE
Lubricating the Levers
WARNING
Set the machine to the parking posture,
stop the engine, remove the starter key
and store it. Failure to do so may result
in the machine moving abruptly, leading
to serious injury or death.
If the levers or pedals no longer move
smoothly, supply grease.
Operating levers
1. Remove the lower mount section of the
boot (1) and turn it upwards.
2. Wipe off the old grease.
3. Supply grease to points (A) and (B).
4. Set the boot (1) back as it was.
Travel levers, blade lever and pedals
1. Remove the floor mat (1).
2. Remove the lower mount section of the
boot (2) and roll it up.
3. Loosen the bolts and remove cover (3).
When Required
4. Use the grease gun to supply grease to
the grease nipples (4).
5. Wipe off the expelled grease.
6. Reinstall the cover and floor mat,
following the removal procedure in
reverse order.
7. Tilt up the platform.
Refer to page 135 “Tilting Up the
Platform”.
8. Use the grease gun to supply grease to
the grease nipples (5).
9. Wipe off the expelled grease.