TAKASAGO ZX-S-1600LAN, Instruction Manual

Page: 47 / 204

Useful Function
------------------------------------------------------------------------------------
44
It is possible to continue to change other setting items without
pressing the “FUNC.” key. In this case, press the “FUNC.” key to
confirm settings once changes are complete.
When selecting Constant Voltage (CV) Priority,
Variable Slew Rate mode (Item 2 set to 2)
Set the Item Number to either 3 or 4
using the VOLTAGE dial.
Set Value 3＝Rising Voltage Slew Rate
Set Value 4＝Falling Voltage Slew Rate
Assign the set value using the CURRENT dial.
Range:0.1V/s～160.0V/s
When selecting Constant Current (CC) Priority,
Variable Slew Rate mode (Item 2 set to 3)
Set the Item Number to either 5 or 6
using the VOLTAGE dial.
Set Value 5＝Rising Current Slew Rate
Set Value 6＝Falling Current Slew Rate
Assign the set value using the CURRENT dial.
Range:
400LN/LAN ： 0.01A/s ～ 80.00Ａ/s
800LN/LAN ： 0.1A/s ～ 160.0Ａ/s
1600LN/LAN ： 0.1A/s ～ 320.0Ａ/s
If using with master slave parallel operation, see
caution on page 43.
Press the FUNC. key again to finish.
Confirms settings and returns the Number Display to
measurement display mode.
CC
CV
OUTPUT POWER (%)
STEP
CURRENT
STEP
VOLTAGE
PRESET FUNC. REMOTE LOCK
20 60 100 LMT 40 80
CC
CV
OUTPUT POWER (%)
STEP
CURRENT
STEP
VOLTAGE
PRESET FUNC. REMOTE LOCK
20 60 100 LMT 40 80
CC
CV
OUTPUT POWER (%)
STEP
CURRENT
STEP
VOLTAGE
PRESET FUNC. REMOTE LOCK
20 60 100 LMT 40 80
CC
CV
OUTPUT POWER (%)
STEP
CURRENT
STEP
VOLTAGE
PRESET FUNC. REMOTE LOCK
20 60 100 LMT 40 80
MEMO
OUTPUT
PRESET OVP OCP
FUNC.
ALARM RESET
Set to 5 or 6
Set to 3 or 4