TAJIMA NEO TEJTII-C, User Manual

Page: 41 / 118

4-4
4. DATA SET MENU
Data input (PC 1)
Data input (PC 1)
The following explains how to receive design data sending from an external device that
is connected with network to the machine. The input data of design will be set.
1.
Connect an external device and the machine using the cable.
When connecting the cable, turn OFF
the power of the machine and external
device.
When performing connection with an
external device, the exclusive cable is
necessary.
Set Panel>Network setting>Network
of Test mode to “1”.

COM connection => p.3-14
2.
Turn on the power.
When turning ON the power of the
machine, turn also on the power of the
external device.
3.
Switch to “DATA MENU”.
4.
Select “PC”.
5.
Receive data from the external device
Press “SET” to make ready for receiv-
ing data.
JZ05
External device
Serial
LAN
The machine
** NETWORK SETTING *
PORT COM
COM SPEED 9600
NETWORK 1
External device The machine
***** EMB START ****
TAJIMA12.DST 1
0/ 1027
01/15: 23-456789A<D>
1
Data
***** DATA MENU ****
1.INPUT DATA FD
2.SELECT DATA
3.DELETE DATA
Frame
Position
***** DATA MENU ****
1.INPUT DATA PC
2.SELECT DATA
3.DELETE DATA
Set