TAJIMA NEO TEJTII-C, User Manual

Page: 98 / 118

10. Outline of functions
Size
10-3
Size
This function enlarges/reduces design of which data has been set.
It is possible to change scale ratio within a range of 80 to 120%.
Unit of scaling: 1%
[Example: 120%]
Even if a size of design data changes,
the start position of design will remain
unchanged.
Repeat
This function repeats embroidery of a design of which data has been set.
Set embroidery direction, the number of times of repeat, and design interval.
It is possible to rotate and/or reverse (mirror) the design repeatedly arranged.
Priority order: Repeat
→
Rotation
→
Mirror
[Example Direction
: Horizontal, The number of times: 4, Space: 55 mm
When performing “Trace” after setting “Repeat”, it will be possible to confirm the whole
embroidery space. Adjust start position, the number of repeats, interval, etc. so that the
embroidery space does not exceed the frame.
[Example Direction: Horizontal, The number of times: 3, Space: 60 mm, rotation: 90°,
Mirror:Y]
If mirror is set to X-axis in the repeat setting illustrated above, embroidery will be
performed in reversed order.
JZ05
120%
Original embroidery design
60 mm
3
2
1
Direction: horizontal (Even if you set
horizontal direction, the machine
will actually perform embroidery
in vertical direction because the
design is rotated by 90°.)
Rotation
Mirror
Design start
position