TAJIMA NEO TEJTII-C, User Manual

Page: 43 / 118

4-6
4. DATA SET MENU
Data input (PC 2)
Data input (PC 2)
The following explains how to input design data of an external device that is connected
with network while selecting it from the machine. The input data of design will be set.
1.
Connect an external device with the machine using the serial cable.
When connecting the cable, turn OFF
the power of the machine and external
device.
When performing connection with an
external device, the exclusive cable is
necessary.
Set Panel>Network setting>Network
of Test mode to “2”.

COM connection => p.3-14
2.
Turn on the power.
When turning ON the power of the
machine, turn also on the power of the
external device to start DG/ML.
3.
Switch to “DATA MENU”.
4.
Select “PC”.
5.
Searching of external device data
Pressing “SET” will enable you to see
design data registered in the external
device DG/ML from the machine.
6.
Select design data of the external device.
When design data that exceeds
memory capacity is input, error code
“2BA” will be displayed.
2BA=> p.11-2
JZ05
External device
Serial
LAN
The machine
** NETWORK SETTING *
PORT COM
COM SPEED 9600
NETWORK 2
External device The machine
***** EMB START ****
TAJIMA12.DST 1
0/ 1027
01/15: 23-456789A<D>
1
Data
***** DATA MENU ****
1.INPUT DATA FD
2.SELECT DATA
3.DELETE DATA
Frame
Position
***** DATA MENU ****
1.INPUT DATA PC
2.SELECT DATA
3.DELETE DATA
Set
**** SELECT DATA ***
1 SOCKS.DST
STITCH 3119 ST
MEMORY 257536 ST
Frame
Position