TAJIMA NEO TEJTII-C, User Manual

Page: 88 / 118

9. Manual operation
Offset (change of position)
9-5
Offset (change of position)
Change offset position.
1.
Select offset
When changing frame type, the offset
position will return to (0, 0).
2.
Change offset position
The frame will move to the registered
offset position. Set a new position
using frame travel key.
3.
Set
Pressing “SET” will register the
moved position.
4.
Completion
5.
...............................................................Return to the original
position
Pressing the offset key will cause the
frame to return to the position before
travel.
CAUTION
When performing this operation, do not put your hands
under the needle or on the machine table. If your hands are
under the needle or on the machine table, you may be
injured by the needle or the moving frame.
JZ05
* * * * E M B S T A R T * * * *
T A J I M A 1 2 . D S T 1
0 / 1 0 2 7
01/15: 23456789AB<D>
1
Offset
* * * * E M B S T A R T * * * *
O F F S E T
D x + 2 7 . 1 ( - 2 7 . 1 )
D y - 5 6 . 4 ( + 5 6 . 4 )
Frame
Position
* * * * E M B S T A R T * * * *
O F F S E T
D x + 6 0 . 9 ( - 2 7 . 1 )
D y + 1 4 . 1 ( + 5 6 . 4 )
Set
* * * * E M B S T A R T * * * *
O F F S E T
D x + 6 0 . 9 ( - 6 0 . 9 )
D y + 1 4 . 1 ( + 1 4 . 1 )
* * * * E M B S T A R T * * * *
O F F S E T
D x + 6 0 . 9 ( - 6 0 . 9 )
D y + 1 4 . 1 ( + 1 4 . 1 )
* * * * E M B S T A R T * * * *
T A J I M A 1 2 . D S T 1
0 / 1 0 2 7
01/15: 23456789AB<D>
1
Offset