Tait TP9500 User Manual Download Page 35 | Manualshive

Page: 35 / 126

background image

• is compatible with the Bluetooth Specification Version 2.0 or higher. Tait recommends Bluetooth Specification

Version 2.1 or higher.

• Includes Bluetooth Headset Profile (HSP) adopted version 1.1 or 1.2, or Bluetooth Handsfree Profile (HFP)

version 1.5 or 1.6.

Wearing the Headset

Headsets come as an over-the-head accessory, or as a remote speaker microphone.

With a headset worn over the head, place it on the ear. Depending on which ear the headset will be worn, simply
adjust the ear hook accordingly.

To get the best performance from the headset:

1. Do not block the device’s internal antenna (see the device’s user documentation). The human body can

interfere with a Bluetooth signal.

2. If the radio is used with the right hand, wear the over-the-head headset on the right ear.

3. Avoid coming in contact with the internal antenna of a headset or radio.

4. When using a remote speaker microphone with active noise cancellation turned on, the RSM should be

turned toward the mouth when speaking.

Pairing and disconnecting a wireless headset with the radio

Before attempting to connect a wireless headset, Tait recommends that the headset is fully charged.
Refer to the headset installation instructions for charging instructions.

Pairing creates a unique and encrypted wireless link between the Bluetooth-capable radio, and the Bluetooth headset.
To use a headset with a radio, the devices must first be paired.

When connecting to a wireless headset for the first time, instruct the radio to search for compatible headsets using
Bluetooth wireless technology. The search should take less than one minute.

To pair a wireless headset with the radio:

1. Turn on the radio.

2. Put the wireless headset into pairing mode.

3. Press

Menu

and select

Wireless headset

>

Find new devices

.

The

New devices

menu opens, and while the radio searches for the new device, the message

Searching ...

appears.

4. Select Connect when the required accessory appears in the list of new devices, then

Yes

to add the

headset to

My Headsets

.

35

Tait International Ltd December 2019

«
...
33
34
35
36
37
...
»

Summary of Contents for TP9500































































































































Reviews:

No comments

Related manuals for TP9500

Brand: Caltta Pages: 13

Brand: Fresh 'N Rebel Pages: 34

POF GB/UAE 1xPPR

Brand: Datalight Pages: 2

Brand: TRADEpower Pages: 12

Brand: Tivax Pages: 31

Brand: Bush Pages: 32

Brand: C. Crane Pages: 32

Brand: Jung Pages: 10

Brand: Curtis Pages: 15

Brand: Vertex Standard Pages: 4

Brand: Kenwood Pages: 39

Brand: Kenwood Pages: 31

Brand: Kenwood Pages: 52

Brand: Kenwood Pages: 15

Brand: Kenwood Pages: 16

Brand: Kenwood Pages: 2

Nexedge NX-5400

Brand: Kenwood Pages: 94

Brand: Kenwood Pages: 115

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands