Tait TP9500 User Manual Download Page 34

Page: 34 / 126

Adjusting the Speaker Volume

Rotate the power/volume control clockwise to increase the speaker volume and counterclockwise to decrease the
volume.

The volume control also changes the volume level of the radio’s audible indicators.

Locking and Unlocking the Keypad

The keypad lock feature prevents keys being pressed accidentally. The number of keys that are locked depends on
the way the radio is programmed.

To lock the keypad:

• Press and hold the right selection key for about one second.

Depending on the radio model and the way it is programmed, the radio may have a 3-way selector that
can be used to lock the keypad, or the left selection key can be configured to lock the keypad.

The message

Keypad locked

briefly appears on the display, and

Unlock

appears above the right selection

key, in place of

Menu

When any of the locked keys are pressed, the message

Keypad lock active

appears.

The left selection key can also be configured for the keypad lock function.

To unlock the keypad:

• Press and hold the right selection key for about one second.

Using a Wireless Headset

This feature is controlled by a software license (SFE) and may not be available with the radio.

A Bluetooth® wireless headset may be connected to a radio using the

Wireless headset

menu or a function key.

When a menu option has been selected in the

Wireless headset

menu, calls can still be received and

replied to without interrupting the selected operation.

Headset Compatibility with Tait Radios

Bluetooth wireless devices may operate with Tait radios, provided the accessory:

Tait International Ltd December 2019

Summary of Contents for TP9500































































































































Search results

Summary of Contents for TP9500

Reviews:

Related manuals for TP9500

Brands by name

Popular brands

Tait TP9500, User Manual

Search results

Summary of Contents for TP9500

Reviews:

Related manuals for TP9500

Brands by name

Popular brands