310
Transmitter Fault Finding (>25W)
TM8100/TM8200 Service Manual
© Tait Electronics Limited
November 2007
Task 23 —
Power Control
for PA Driver
In this task any faults in the path between the power-control circuit and the
PA driver will be located, as well as any fault with the PA driver.
1.
Check for short circuits at the gate of the PA driver
Q306
. Check
R333
,
R336
(see
Figure 11.9
and
Figure 11.10
),
C310
,
R324
and
R327
(see
Figure 11.13
to
Figure 11.15
) between the power-con-
trol circuit and Q306.
2.
Repair any fault revealed by the checks in
Step 1
. If none of the
above-mentioned components is faulty, replace
Q306
(see
Figure 11.13
to
Figure 11.15
).
3.
Confirm the removal of the fault and go to
“Final Tasks” on
page 163
. If the repair failed, replace the board and go to
“Final
Tasks” on page 163
.
Figure 11.17 Components of concern on the bottom-side of the main board (VHF)
B1 BAND
C319
R396
R341
COPPER PLATE
NB BOT CAN
VCO BOT CAN
D311
D TX INH TEST POINT
Summary of Contents for TM8100 mobiles
