Chapter 3 Configuration and Management
32
Sample:
admin> set interface ethernet 0 ip_address 192.168.1.222
2) Set Default Gateway
Command format:
set interface ethernet <id(0..1)> default_gateway <ip string for static>
Sample:
admin> set interface ethernet 0 default_gateway 192.168.1.20
3) Save and run the setting
Type “save” to save and run the setting.
The two commands have been executed as shown in the following Figure.
Figure 3-7
Set Ethernet Interface
3.1.1.7
Check the setting of Ethernet interface
Type “show interface Ethernet 0” in the Terminal Emulation to check the setting of
Ethernet 0. The result of the status is shown as following.
admin>show interface ethernet 0
Ethernet0 config Parameters:
Interface mode:enable
IP mode:static
IP address:192.168.1.222
Net mask:255.255.255.0
Default gateway:192.168.1.20
DNS1:0.0.0.0
DNS2:0.0.0.0
Summary of Contents for VENUS 2916
