Tainet VENUS 2916, User Manual

Page: 94 / 225

Chapter 3 Configuration and Management
78
Table 3-26 Description of SIP Group Configuration Items
Field Description
Group Index Quick Start parameter
The assigned realm index (0~7)
Where, 0 to 7 means the used realm.
Group Number Quick Start parameter
The register number and allow use the same number for
different port. The ports used the same number is taken
as group binding number.
Group name The display name for specified group.
Register mode Quick Start parameter
1. Invalid
2. Disable
3. Enable
Realm Index Quick Start parameter
The assigned realm index (0~7)
Where, 0 to 7 means the used realm.
Local service port
number 5060(Default)
Group
authentication ID Quick Start parameter
The authentication user ID.
Group
authentication
password Quick Start parameter
The authentication user password.
Involved TCID
Mode (4S4O
Model Only) FXS
FXO
Involved TCIDs Set the ports of the group.
If the configuration is finished, click
“OK” button bellow the web page to confirm
changes or click
“Cancel” button to deny it.
3.5.4.4 SIP Phone Routing Table Configuration
The Phone Routing Table (build-in phone book) is used to route incoming
telephone calls to IP addresses. This routing table associates a called / calling
telephone number‟s prefixes with a destination IP address or with an FQDN (Fully
Qualified Domain Name).
When Proxy server is not used in VENUS 29xx, a call is routed through the Phone