Tainet ITM-3296bis, User Manual

Page: 28 / 131

FRONT PANEL LCD AND MENU-DRIVEN 3-3
3.3 Operating The TAINET Network Series Modem
1. Keypads : It consists of 5 touch switches.
VO/DA It is used as the voice/data select key for dial line application,
Disconnect/Reconnect selection for Leased Line applications, or
"home" key for set-up menu to go back to the home menu.
Left key ; It is used to shift to left field.
Right key; It is used to shift to right field.
ENTER Enter key; It is used to enter the next lower level menu or confirm
selections.
EXIT Exit key; use it to go back to the upper level menu.
2. LED Indicator : 10 LED bar
PWR -- On for power supply ok.
DTR -- On for DTR signal present.
DSR -- On for DSR signal present.
RTS -- On for RTS signal present.
CTS -- On for CTS signal present.
TXD -- On for "0", off for "1" TXD signal present.
DCD -- On for received carrier signal (DCD) present.
RXD -- On for "0", off for "1", RXD signal present.
OH -- On
for off-hook.
TST -- On for test mode active.
3. LCD Display :
The TAINET Network Series Modem has a 2 by 16 characters LCD with auto
backlight control. Some different pictures of the LCD display are shown below.
A. Top Menu
Example: V34 288 V42bis
D ANS CONNECT 9
Description:
1) Modem Protocol: V34 288, V32b 144T, V32 96T, V22b 2400, V29 4800 ....
2) Data Protocol: V.42bis, V.42, MNP-5, Normal, Direct.
3) Line Type: D (Dial Line), L (Leased Line).
4) Mode: ANS-Answer Mode, ORG-Originate Mode.
5) Status: Stanby, Handshaking, Connect, Retrain, Ring...
6) SQ: 9,8,7,6....,0