Tainet ITM-3296bis, User Manual

Page: 21 / 131

2-4 INSTALLATION
2.6 Connecting With Dial Line
To connect your modem to a permissive RJ11 voice jack and dial line as follows:
1) Connect the 4-pin modular to 4-pin modular cable provided to connect your
modem to telephone set via an RJ11 jack for manual dial operation or voice
transmissions.
2) Connect one end of the 4-pin to 4-pin modular cable to the DIAL connector on
the modem rear panel and the other end to the telephone line modular jack.
The pin layout of the PHONE connector for RJ11 operation is as follows:
Modem PHONE
Connector Pin No. PHONE
Jack Function CABLE Wire
Color Assignment
1 N/C N/C
2 Not Used Black
3 Tip Red
4 Ring Green
5 Not Used Yellow
6 N/C N/C
The pin layout of the DIAL LINE connector for RJ11 operation is as follows:
Modem DIAL LINE
Connector Pin No. DIAL LINE
Jack Function CABLE Wire
Color Assignment
1 N/C N/C
2 Not Used Black
3 Tip Red
4 Ring Green
5 Not Used Yellow
6 N/C N/C
ON
OFF
DTE
PHONE LEASED DIAL
DIAL
LINE
RED
GRN
TELEPHONE
BOX
RJ11 RJ11
RJ11 modular telephone cable
RJ11 modular telephone cable
Fig 2-1 : Dial Line Connection