Tainet ITM-3296bis, User Manual

Page: 95 / 131

5-8 INSTRUCTION SETS
5.4 V.25bis Auto call Unit
V.25bis auto call unit is used for auto calling in asynchronous and synchronous data
formats.
A CRNx - Call request - dial a phone number (x) entered on DTE
keyboard.
C PRNy;x - Program number - store a phone number (x) in specified
memory address (y). y=0-9
D RLN - Request list of all stored numbers.
F DIC - Disregard incoming call. Auto answer disable.
2. V.25bis Responses
C VAL - Modem received valid command entry.
D LSN - Modem responses LSN when received RLN command.
E CNX - Connection.
3. V.25bis Call Failure Responses
A CFIET - Busy tone had been detected
C CFIRT - Ringback timeout.
D CFICB - Modem busy.
F CFIND - No dial tone is detected.
1. V.25bis Commands
B CRSy - Call request - dial a phone number stored in specified memory
address (y). y=0-9.
E CIC - Connect incoming call. Auto answer enable.
A INC - Modem detects an incoming call.
B INV - Modem received invalid command entry.
B CFIAB - Modem aborted a call.
E CFINS - No phone number is stored.