Tainet ITM-3296bis, User Manual

Page: 52 / 131

FRONT PANEL LCD AND MENU-DRIVEN 3-27
DYNAMIC RANGE ATS40=n Set receive dynamic range.
ç
+4..-33dBm
(bit7..6) /for T-1496 & T-1496terbo.
ç
-4..-43dBm
/for T-1496 & T-1496terbo (default).
ç
+3..-26 dBm
/for T-288C & ITM-3296bis
(V.33/V.29 default).
ç
-6..-33 dBm
/for T-288C & ITM-3296bis.
ç
-6..-43 dBm
/for T-288C & ITM-3296bis (V.34/V.32bis/V.32
/V.22bis/V.22/V.21/V.23 default)
ç
+3..-40 dBm
/for T-288C & ITM-3296bis.
LL TX LEVEL AT%Ln Set leased line transmit level.(TXL)
ç
0..-31 dBm
/default TXL= -8 dBm for 4w L-L. TXL= -10
dBm for 2w L-L.
DL TX LEVEL ATS30=n Set dial line transmit Level, 0..-15 dBm.
ç
0..-15 dBm
(bit7..5) /(default = -10 dBm).
POWER BACKOFF ATS43=n
In V.34 operating mode, the remote modem may
request reduction in the transmit power level
(power backoff) when a significant amount of
non-liner distortion is detected during line
probing.
ç
ON
(bit3) /Enable
ç
OFF
/Disable (default).
PRE-CODING
ATS45=n
In V.34 operating mode, precoding will remove
the effect of noise enhancement in the modem
receive equalizers on lines with attenuation
distortion.
ç
ON
(bit0) /Enable
ç
OFF
/Disable (default).
REMOTE CONFIG Only available when connected and Secondary
CH. is on.
ç
S-REG N=XX
/read or set remote modem's S-register.
ç
LOAD
/Command remote modem to load profile.
ç
SAVE
/Command remote modem to save profile.