Tainet ITM-3296bis, User Manual

Page: 9 / 131

1-2 TAINET NETWORK SERIES MODEM
1.2 Technical Specifications
The T-288C fully comply with ITU-T recommendations V.34, V.33, V.32bis, V.32,
V.22bis, V.22, V.21, V.23, V.29, V.27bis, V.26, V.24, V.28, V.25, V.25bis, V.52,
V.54, V.42, V.42bis, V.8, and BELL 212A/103 operating standards.
The T-1496terbo fully comply with V.32 terbo and ITU-T recommendations V.32bis,
V.32, V.22bis, V.22, V.21, V.23, V.24, V.28, V.25bis, V.52, V.54, V.42, V.42bis, and
BELL 212A/103 operating standards.
The T-1496 fully comply with ITU-T recommendations V.32bis, V.32, V.22bis, V.22,
V.21, V.23, V.24, V.28, V.25bis, V.52, V.54, V.42, V.42bis, and BELL 212A/103
operating standards.
The ITM-3296bis fully comply with ITU-T recommendations V.33, V.32bis, V.32,
V.22bis, V.22, V.21, V.23, V.29, V.27bis, V.26, V.24, V.28, V.25bis, V.52, V.54,
V.42, V.42bis, and BELL 212A/103 operating standards.
•
Modem Protocol : Please refer to table 1-1.
•
Clock Tolerance
(1) Synchronous :
±
0.01%
(2) Asynchronous : Basic range + 1% to - 2.5%
Extended overspeed range + 2.3% to - 2.5%
•
DTE Speed (The following speed with (*) mark depends on each model.)
(1) Synchronous :
T-288C 33600/31200/28800/26400/24000/21600/19200/16800
/14400/12000/9600/7200/4800/2400/1200 bps
T-1496 terbo 19200/16800/14400/12000/9600/7200/4800/2400/1200 bps
T-1496 14400/12000/9600/7200/4800/2400/1200 bps
ITM3296 bis 14400/12000/9600/7200/4800/2400/1200 bps
(2) Asynchronous: 115200/76800/57600/38400/*33600/*31200/*28800/*26400
/*24000/*21600/19200/*16800/14400/12000/9600/7200
/4800/3600/2400/1200/600/300 bps with speed conversion.
Total bit length : 8, 9, 10, 11 bits
Parity bit : odd, even, none
Stop bit : 1, 1.5, 2 bits
•
Error Correction : MNP 4/ITU-T V.42
•
Data Compression : MNP 5/ITU-T V.42bis
•
Flow Control : Hardware CTS/RTS, CTS only
Software X-ON/X-OFF
•
Dial Command : Extended AT and ITU-T V.25bis command set.
•
G3 Fax Modulation and speed : V.29 -- 9600, 7200 bps
V.27ter -- 4800, 2400 bps
V.21 channel 2 -- 300 bps