Tainet ITM-3296bis, User Manual

Page: 53 / 131

3-28 FRONT PANEL LCD AND MENU-DRIVEN
3.5.6 AUXILIARY MENU
ITEM NAME COMMAND DESCRIPTION
SPK. CONTROL ATMn Monitoring speaker switch control.
ç
UNTIL DCD ON ATM1 /Speaker turn on until DCD ON,then turn off
(default).
ç
ALWAYS ON ATM2 /Keep speaker always on.
ç
OFF WHEN DIAL ATM3 /Turn on speaker after dialing is completed, and
then detect until to find out carrier and then turn
off speaker.
ç
OFF ATM0 /Keep speaker always off.
SPK. VOLUME ATLn Speaker vloume control.
ç
LOW ATL0,1 /Set speaker volume to low (default).
ç
MEDIUM ATL2 /Set to medium.
ç
HIGH ATL3 /Set to high.
AUTO FB/FF ATS24=n
(Bit5..4) The modem continuously monitors the S/N ratio
of the telephone line, then fallback or fall forward
data rate automatically when the S/N ratio lower
or higher.
ç
ON (bit0) /Enable
ç
OFF /Disable (default).
SIGNAL MONITOR ATS24=n Reserved. (Auto FB/FF
¦Û°Êª@­°³t
)
(bit5..4)
ç
0\1\2\3 dB /Cable equalization function. (Fine Tune)
SEND BREAK AT\Bn Send break sequence before line disconnection.
ç
OFF AT\B0 /No sending (default).
ç
ON AT\B1 /Sending.
LONG SPACE OFF ATYn Select auto disconnection option when long space
signal received.
ç
ON ATY1 /Enable.
ç
OFF ATY0 /Disable (default).
ASI OVERSPEED AT%An Select async data speed tolerance.(ITU-T V.14)
ç
+1% AT%A0 /Basic range +1% to -2.5% (default).
ç
+2.3% AT%A1 /Extended overspeed range +2.3% to -2.5%.
V32/V33 96T THR ATS46=n Set V.32bis/V.33 9600 TCM auto retrain
threshold. Decreasing this value if the line is
seriously interfered. If the setting is below 10 dB,
it means this speed is not used.
ç
0...49dB /(default = 16 dB).