Tadpole VIPER, User Manual

Page: 80 / 210

Using the Serial port
VIPER has an RJ-12 port on the right side for a single
serial port.
To use your serial port:
1. Shut down the VIPER according to the instructions in
“Shutting VIPER down” on page 33.
2. Make sure the serial device you will be connecting to it is
also off.
3. Connect a serial device to the RJ-12 connector and power
up VIPER and the serial device.
Figure 3-21: Serial port
54 VIPER Product Family User’s Guide
Using VIPER
Using VIPER features
Serial