Tadpole VIPER, User Manual

Page: 53 / 210

Figure 3-4 Front panel battery status LED
Recharging a new battery
After installing a new battery, use the AC adapter to
recharge the battery. It takes about 2.5 hours to recharge a
new battery when the VIPER is turned off. After fully
charging the battery, you can operate the VIPER for about
1 hour, depending on your configuration and applica-
tions.
Removing the battery
1. Shut down the VIPER according to the instructions in
“Shutting VIPER down” on page 33.
2. Turn the VIPER over.
3. Press the battery latch to the right (away from the side), grasp
the edge of the battery and gently pull it out of the battery bay.
Figure 3-5: Removing the battery
Using VIPER
Setting up
Chapter 3
Using
VIPER
VIPER Product Family User’s Guide 27