Tadpole VIPER, User Manual

Page: 142 / 210

To mark a location as suspendable click the Suspendable
checkbox while the item list is blank. To indicate that the
system should switch to another location before suspend-
ing select the alternate location from the list and then
click Suspendable.
The Suspend System button will appear on the Locations
dialog box when this location is active and can be sus-
pended so that a single click can suspend the system.
Susploc(1m)
can be invoked from the command line
to perform the same task.
Starting and stopping scripts
The Available list shows you all the Solaris operating
environment scripts that can be added to start or stop
lists.
Click on the name of a script in the Available list if you
wish to add it to the Start or Stop list, or both. When you
click on a script in the Available list, its purpose will be
briefly described and it will be highlighted in the Start
and Stop list if it is contained there. In addition, the
appropriate buttons in the Start and Stop lists become
available for your use:
Click an ADD button to provide a Script index number
that specifies the sequence in which this script will be
started or stopped relative to the other scripts in the list.
Scripts with lower numbers are started or stopped before
scripts with higher numbers. Use the up and down arrows
next to the Script index numeric area to assign a higher or
lower number, or highlight the existing number and type
in the number you wish to assign to this script. Click OK
to add the script to the list.
Changing Locations
Using the Scripts Editor dialog
116 VIPER Product Family User’s Guide