Tadpole VIPER, User Manual

Page: 37 / 210

First steps
Once you've completed the following steps, you'll be
ready to start working with your VIPER.
1. Check the ambient air temperature to make sure it is
between 41–104º F (5–40º C).
CAUTION:
If your notebook has been exposed to tempera-
ture extremes (variations of more than 10 degrees of tempera-
ture or 10 percentage points of humidity), you will need to
stabilize the notebook's temperature. Let your VIPER
adjust to room temperature before proceeding.
2. Install the VIPER Lithium-Ion battery into the battery bay,
which is located on the front left side of the VIPER - the
same side as the AC power jack. Push it in until you hear it
click into place.
Figure 2-1: Installing the battery
Getting Started
First steps
Chapter 2
Getting Started
VIPER Product Family User’s Guide 11