Operating the FlexSet
47
FlexSet-IP 280S User Guide
During Idle
[SltMon]
Silent Monitor
enables an authorized (COS and AUTHORIZATION) user to monitor any port, station or
trunk (except conference), without warning to the monitored party. See
.
[AcctCd]
Account Code
is used to mark an external call (incoming or outgoing) with an account code, which can be
used for later reference/billing. Used to enter an account code for the current external call
..
See
[IdCtrl]
Caller ID Control
overrides the system-defined caller ID defaults when making external calls (as well as
internal calls, depending on system-wide settings). Thus, if your ID is sent by default when calling external
numbers, selecting this will block the number, and vice versa. See
[WakeUp]
Wake Up
is used to set, review, or cancel wakeup calls which will ring your FlexSet at a designated time.
More than one wakeup call can be programmed. See
[aWake]
Attendant WakeUp
is relevant for Attendant Console only. Press
[aWake]
to access the attendant wakeup
options. See
.
[CnfIns]
Conference Inspect
allows you to release a conference participant from an ongoing conference. You may
also view the participant list. See
Conference Calls: Conference View/Release on page 89
[GpCall]
Group Calls
is used to activate Group Call Conference features. See
.
[AcdUcd]
ACD/UCD Options
is used to activate ACD/UCD features for Call Center or Hunt group agents. See
ACD and UCD Hunt Groups on page 56
[Lock]
Phone Lock
is used to prevent unauthorized persons from using your phone line. Incoming calls may still be
answered. See
[Exec]
Executive Privilege
is used to copy all the COS features from any system station to your telephone, in order
to use features or to dial numbers restricted to the current station. See
Executive Privilege on page 107
[COS-Sw]
COS Switchover
is used to change your Class of Service from Primary to Secondary or vice versa. Different
COS give different dial and feature capabilities to a particular station. See
[Setup]
Setup
is used to program your station for specific feature activation. See