Tadiran Telecom FlexSet-IP 280S User Manual Download Page 93

Page: 93 / 283

Station Telephony Features

FlexSet-IP 280S User Guide

Camp On (Call Back)

Camping On while your FlexSet is idle:

1. Press

[CampOn]

2. Dial the destination number.
3. The

CAMPING ON Name

message appears to inform you that you are camped on.

Entering additional destinations to the Camp On list:

1. Press

[CampOn]

2. Choose

[Dest]

to enter destination.

3. Dial the destination number.
4. The

CAMPING ON

Name

message appears to inform you that you are camped on.

Canceling a number from the Camp On list:

1. Press

[CampOn]

2. Use

[Next]

or the

button to scroll through the list of Camp On destinations and select a destination.

3. Choose

[Cancel]

to cancel Camp-On.

When the line is available, the system will call you back. Answer the call to automatically dial the camped on station/trunk (or
should you hear the distinctive dial tone (defined system-wide), press

[CampOn]

to initiate ringing).

For Trunks Only

After the trunk line is free, you must continue dialing the outside dial number for external numbers.

Summary of Contents for FlexSet-IP 280S




























































































































































































































































































Search results

Summary of Contents for FlexSet-IP 280S

Reviews:

Tadiran Telecom FlexSet-IP 280S, User Manual, Page: 93 / 283

Search results

Summary of Contents for FlexSet-IP 280S

Reviews: