Tadiran Telecom FlexSet-IP 280S User Manual Download Page 193

Page: 193 / 283

Station Telephony Features

182

FlexSet-IP 280S User Guide

Transfer (Xfer)

•

Disconnect to automatically transfer the call (unscreened transfer).

If the 3rd party is busy or does not answer, the call will return to you with the relevant BUSY or

ANSWER

message.

Station does not answer

Station is busy

Answer the return call, then either:

• Ask the calling party if they wish to transfer to another party.
• Hang up.
• Press

[CampOn]

to automatically camp on to the station from which the call was transferred.

Transferring a held call:

Use transfer of a held call to connect an incoming call to the held party, such as when you have to locate someone for a caller.
1. Press

[Xfer]

XFER

. While the party is being held, dial a destination number.

2. Press the flashing DSS key associated with the held call.
3. Press

SPKR

or hang up to transfer the call.

NANS

station unanswered # original caller #

NO ANSWER station unanswered #

→

DND

Mute

FwdAll

All-E

Number

SBSY

busy station # original caller #

BUSY busy station #

→

DND

Mute

FwdAll

Number

CallWt

Summary of Contents for FlexSet-IP 280S




























































































































































































































































































Search results

Summary of Contents for FlexSet-IP 280S

Reviews:

Related manuals for FlexSet-IP 280S

Brands by name

Popular brands

Tadiran Telecom FlexSet-IP 280S, User Manual

Search results

Summary of Contents for FlexSet-IP 280S

Reviews:

Related manuals for FlexSet-IP 280S

Brands by name

Popular brands