Tadiran Telecom FlexSet-IP 280S User Manual Download Page 199

Page: 199 / 283

Station Telephony Features

188

FlexSet-IP 280S User Guide

Transfer: Broker/Consultation/3-Way Conference Call

Other options after 3-way call is established:
• Press

[Xfer]

XFER

again to release the third party, and continue conversing with the original party.

• Press the lit

[Source]

to converse privately with the first (Source) party that you connected to. The third (Destination)

party is put on hold while you converse and

[Dest]

flashes.

• Press the lit

[Dest]

to converse privately with the second (Destination) party that you connected to. The second

(Source) party is put on hold while you converse and

[Source]

flashes.

• Press the flashing

[Dest]

[Source]

soft key to switch between the Source and Destination parties.

• Press

[3-Way]

to reconnect all three parties again.

• Press

[FrcRls]

to end the call (3-Way or 2-Way).

NOTE!

If you do not succeed in establishing a 3-way call, your Transfer COS definition may not be set to
use the 3-Way Call function. Consult your system administrator for details.

Summary of Contents for FlexSet-IP 280S




























































































































































































































































































Search results

Summary of Contents for FlexSet-IP 280S

Reviews:

Related manuals for FlexSet-IP 280S

Brands by name

Popular brands

Tadiran Telecom FlexSet-IP 280S, User Manual

Search results

Summary of Contents for FlexSet-IP 280S

Reviews:

Related manuals for FlexSet-IP 280S

Brands by name

Popular brands