Tadiran Telecom FlexSet-IP 280S User Manual Download Page 46

Page: 46 / 283

Operating the FlexSet

FlexSet-IP 280S User Guide

Making Internal Calls

During a Break In

After dialing a busy destination number and choosing

[Brk-In]

(see

Upon Hearing Busy Tone on page 31)

, both conversing

parties can hear your voice. You may press

SPKR

or hang up in order to allow the continuation of the call, or press on one of

the following soft keys.

[Xfer]

Transfer

is used to converse in private with the caller party (from the original 2-way call). The called party is

released. See

Transfer (Xfer) on page 181

[Mute]

Mute

can be activated during a Break In to mute your side, allowing you to listen to the conversation but not

speak. When this feature is activated by

[Mute]

on/off toggle switch, a bullet appears to the left of

[Mute]

. The

mute feature deactivates the microphone for your speakerphone and handset or headset. Press the toggle key
again to reactivate the microphone (see

page 141

[FrcRls]

Forced Release

enables an authorized user to end the conversation and release two ports actively connected

to each other.

[Dest]

Destination

is used to converse, in private, with the 3

party. The called party is put on hold. Press again for

3-way conversation.

[Source]

Source

is used to converse, in private, with the called party. The 3

party is put on hold. Press again for 3-

way conversation.

[CallWt]

Calls Waiting

can be used to view the number of calls waiting for you during a conversation.

[Number]

Number

is used to briefly display the two port dial numbers instead of the names.

[Spk/Hs]

Speaker/Headset

toggles between speaker and the handset operation. See

Using the Speakerphone or

Headset on page 19

B TO

called number or name

3rd party

↓→

Xfer

Mute

FrcRls

Dest

Source

Summary of Contents for FlexSet-IP 280S




























































































































































































































































































Search results

Summary of Contents for FlexSet-IP 280S

Reviews:

Tadiran Telecom FlexSet-IP 280S, User Manual, Page: 46 / 283

Search results

Summary of Contents for FlexSet-IP 280S

Reviews: