Tadiran Telecom FlexSet-IP 280S User Manual Download Page 208

Page: 208 / 283

Attendant Features

197

FlexSet-IP 280S User Guide

Call Forward

[Busy]

[Busy-E]

Forward Busy

. The attendant may program stations and boss groups so that incoming calls ring at another

destination when the originally called station or group is busy.

[NoAns]

[NoAn-E]

Forward No Answer

. The attendant may program stations and boss groups so that incoming calls ring at

another destination when the originally called station or group does not answer within a system-defined
number of rings.

[Time]

[Time-E]

Forward Timed

. The attendant may program stations, boss groups and ACD/UCD Groups so that incoming

calls ring at another destination during specified system-defined time periods.

See table

on page 71

Operating Attendant Call Forward:

1. Press

[aFwd]

2. Choose the required forwarding option (

[All]

[All-E]

[

Busy

]

[Busy-E]

[NoAns]

[NoAn-E]

[

Time

]

[Time-E]

3. Choose

[St/Gp#]

and dial the originating station/group number, or scroll between stations/groups using

4. To set Call Forward, choose

[Dest]

and dial the call forward destination number, OR

To cancel Call Forward, choose

[Cancel]

5. Press

SPKR

[Exit]

to exit and save.

Summary of Contents for FlexSet-IP 280S




























































































































































































































































































Search results

Summary of Contents for FlexSet-IP 280S

Reviews:

Related manuals for FlexSet-IP 280S

Brands by name

Popular brands

Tadiran Telecom FlexSet-IP 280S, User Manual

Search results

Summary of Contents for FlexSet-IP 280S

Reviews:

Related manuals for FlexSet-IP 280S

Brands by name

Popular brands