TA Instruments DSC Autosampler CE, Operator'S Manual

Page: 65 / 190

TA I
NSTRUMENTS
DSC A
UTOSAMPLER
CE 3–15
Stopping the
Autosampler CE
Three keys on the Autosampler CE keypad
enable you to suspend and resume Autosampler
CE motion: the
HALT
key, the
RESUME
key,
and the
RESET SAMPLER
key.
The HALT Key
The
HALT
key affects only the motion of the
Autosampler CE turret assembly; any currently
running heating or cooling method on the control-
ler continues. After you press the
HALT
key,
you can resume action with the Autosampler CE
RESUME
key. The Autosampler CE then
completes the task that was interrupted.
When the Autosampler CE is in manual mode,
you can use the motion keys to move the turret
assembly while it is halted without canceling the
previous command. However, if you press any
of the following keys while the Autosampler CE
is halted, the previous command is forgotten:
•
ESCAPE/CLEAR
•
MANUAL/AUTOMATIC
•
RESET SAMPLER
If you press
ESCAPE/CLEAR
after halting
the Autosampler CE and then enter a new
command before pressing the
RESUME
key,
the new command is executed when you press
RESUME
.
Stopping the Autosampler CE