T-VIPS CP560, User Manual

Page: 89 / 200

WEB Interface 89
ID: um_t2gateway CP560 DVB-T2 Gateway User’s Manual Rev. 2.2 (3686)
Effective Bitrate
The effective bitrate in Mbit/s (excluding null packets) of the transport stream currently
received on the input.
Alarm Status
The current alarm status of the input is shown as a coloured indicator, the colour indicating
the highest severity level of the active alarms. If the port is disabled the indicator is grey.
Below the table three values as shown. They are:
Total input rate
The combined total bitrates of all the transport streams of all the input ports.
Total effective input rate
The combined effective bitrates (total, minus null packets) of all the transport streams of
all the input ports.
The Reset Stats button at the bottom of the page gives access to a dialogue box that allows reset
of channel statistics. Figure 8.43 shows the dialogue box. Select the statistics items you want
to reset and then press
Apply
.
Figure 8.43 Reset
statistics dialogue box
8.5.1.1 IP Inputs
If the unit has the “Ethernet data interface” feature enabled the IP Inputs tab is shown on the
Inputs Overview page.
The page lists IP input streams defined and offers an interface to add or remove input streams.
The table has the following columns:
Enable
This shows whether the IP input is enabled or not. An input is enabled or disabled by
clicking the check box and hitting
Apply .
IP Input
The name of the IP input, consisting of the factory defined label with the physical port
number and the user defined name. If no user defined label is defined for multicast
streams, the multicast address is displayed.