T-VIPS CP560, User Manual

Page: 17 / 200

Installing the Equipment 17
ID: um_t2gateway CP560 DVB-T2 Gateway User’s Manual Rev. 2.2 (3686)
4 Installing the Equipment
Caution: The CP560 must be handled carefully to prevent safety hazards
and equipment damage. Ensure that the personnel designated to install
the unit have the required skill and knowledge. Follow the instructions
for installation and use only installation accessories recommended by the
manufacturers.
4.1 Inspect the package content
• Inspect the shipping container for damage. Keep the shipping container and cushioning
material until you have inspected the contents of the shipment for completeness and
have checked that the CP560 is mechanically and electrically in order.
• Verify that you received the following items:
− CP560 with correct power supply option
− Power cord(s)
− CD-ROM containing documentation and Flash Player installation files
− Any optional accessories you have ordered
Note: 48 VDC versions do not ship with a power cord; instead a Power
D-SUB male connector for soldering to the supply leads is supplied.
4.2 Installation Environment
As with any electronic device, the CP560 should be placed where it will not be subjected to
extreme temperatures, humidity, or electromagnetic interference. Specifically, the selected site
should meet the following requirements:
• The ambient temperature should be between 0 and 50
◦
C (32 and 122
◦
F).
• The relative humidity should be less than 95 %, non-condensing. Do not install the
unit in areas of high humidity or where there is danger of water ingress.
• Surrounding electric devices should comply with the electromagnetic field (EMC) stan-
dard IEC 801-3, Level 2 (less than 3 V/m field strength).
• The AC power outlet (when applicable) should be within 1.8 meters (6 feet) of the
CP560.