T-VIPS CP560, User Manual

Page: 145 / 200

SNMP 145
ID: um_t2gateway CP560 DVB-T2 Gateway User’s Manual Rev. 2.2 (3686)
VIGW-PLAT-SWITCH-MIB
This MIB contains parameters related to control of automatic redundancy switches. It
is supported by products that have at least one type of redundancy switch controller, for
example an automatic input switcher or an automatic service switcher. Parameters include:
•
Control of currently selected input
• Control of switch controller mode
VIGW-PLAT-IPTRANSPORT-MIB
This MIB contains tables that relate to reception and transmission of streams over IP net-
works. The tables are independent of the payload format of the streams. The MIB is
supported by products that support transmission and/or reception of streams over IP net-
works. Examples of information included are:
• Control of IP destination address for transmitted stream
• Control of UDP ports
• Status reporting of bit-rates and packet loss
VIGW-PLAT-VIDEO-MIB
This MIB contains tables and settings to configure video-specific processing. It is support-
ed by products that relate to digital video streams, for example JPEG2000-based encod-
ing/decoding products.
Examples of included information are:
• Control of video encoding parameters
• Control of video decoding parameters
VIGW-PLAT-RF-MON-MIB
This MIB contains tables and settings to configure RF-specific parameters. It is supported
by products that relate to RF monitoring of DVB-T/T2 signals. Parameters include:
• Configuration of RF input signal and measurement settings
• RF status, DVB-T/T2 status and PLP status on individual RF channel inputs
9.4 SNMP related configuration settings
The SNMP related configuration parameters are located on the Device Info/SNMP settings page
in the GUI.
9.4.1 Community strings
The community strings are used to provide simple password protection for SNMP read and
write requests. The strings can be configured from the GUI. It is also possible to configure the
community strings to be used for trap messages.