T-VIPS CP560, User Manual, Page: 87 / 200

WEB Interface 87
ID: um_t2gateway CP560 DVB-T2 Gateway User’s Manual Rev. 2.2 (3686)
for each level and therefore cannot be changed. Each privilege level, however, has an
administrator definable password.
To modify the password for a given privilege level select the user name from the list
and click the
Set password
button. The administrator is then prompted with a dialogue
requesting a new password.
Three user privilege levels are available.
guest
Can view configuration information and alarm logs
operator
Can configure the settings on the device, but can not alter passwords
admin
Device administrator, full access to the device.
8.4.10 GUI Preferences
Figure 8.41 GUI Preferences page
The GUI Preferences page contains settings that affect the web interface.
Enable confirmation on Apply
Configures the web UI to prompt users for confirmation before committing changes to the
device configuration. When disabled the Web UI will only prompt for confirmation prior
to performing severe operations such as device reset.
Enable GUI scaling
If enabled, the web interface will be shown with the currently configured GUI scale level.
It also enables the use of CTRL + + and CTRL + - to change scale level. When enabling or
disabling this option the web interface may hang for some seconds as it changes the font
used.
GUI scale level
The current scale level for the GUI. This is ignored if GUI scaling is not enabled. A value
of 0 means normal size.