T-Home Comfort Pro P 300, User Manual

Page: 54 / 152

52
Telephoning General Functions
Block Dialling/Automatic Dialling
If you activate the menu item
5 En-bloc dialling
in the MenuCard
Phone settings
, you can enter
all call numbers (and correct or add digits to them, if necessary) without lifting the handset (see MenuCard
“Phone Settings” starting on page 119). The number is displayed in the info line. Entries from the redial list,
the call list and the telephone book that are to be dialled using
O
also appear in the info line first. The
number you have selected is not dialled until you lift the handset or press the hands-free/open-listening
key
L
.
If block dialling is switched off, the telephone switches to open-listening mode as soon as you enter a call
number and dial it.
N
Note: An initiated automatic dialling is automatically terminated after 60 seconds if no
further entries are made.
Block Dialling and Headset Operation
It is useful to activate the “block dialling” feature when using a headset (if you have activated this via the
MenuCard
Phone settings
, see page 120). The call number entered will only be dialled once you have
pressed the headset key
K
.
Once block dialling has been activated and the headset switched on, the phone immediately switches over to
headset operation and the call number is dialled when you enter a number on the phone.
Dialling a Different User or a Different Terminal
You can also use your system telephone for dialout with a headset. To do so, save a destination call number
on your system telephone (via the MenuCard
Connections
, the menu entry
2ƒDial
:
0ƒRemote
dialling
, please refer to page 125 also). The saved call number will be dialled automatically when you
press the headset key within 30 seconds. After 30 seconds, the dialout will be deactivated automatically.
This feature can be used on all devices for which the system administrator has configured a device ID. This
means that you can also save a dialout for another user who, e. g. also has a system telephone.
For the System Administrator:
Device IDs are set up in the Configurator , Telephony: Extended: Device ID menu. Authorisation for this
feature is assigned in the User Manager: User groups menu with the Dial for other phone setting.