116
Features and MenuCards
Main Menu
After you have selected an MSN, an MSN group or all MSNs, select the type of call forwarding
(
Immediately
,
After delay
or
Busy
) then enter the external destination (
Dest.
).
N
Note:
For this type of call forwarding, the (external) destination number is always
entered without the line seizure code.
If you assign “Divert MSN” to a feature key (see also
Programming Functions (Features)
page 135), you can also enter a
Text
to label the key with. The label is displayed in the Comfort Pro’s
Configurator
for informational purposes.
Activate the function using
On
. Activated call forwarding (
Immediately
,
After delay
,
Busy
) is indicated
in the MSNs selection list by a “+” before the call number. A “?” before the entry (e. g.
?ƒMSN Groupƒ1
)
means that different call forwarding types are activated in this group. Using the plus/minus key
=
,
you can switch off an activated call forwarding.
N
Note:
If “Divert MSN” is activated in the exchange (= external call forwarding,
configured by the system administrator), it can take a few seconds after configuring for
call forwarding to be activated in the exchange.
4ƒDivert door
: “Divert door” is available for door calls. Providing you have the relevant authorisation, you
can forward door calls to your telephone to another (internal or external) telephone (a so-called “pharmacy
line”). If several door bells are configured on your communications system, select first the door bell whose
calls are to be diverted. Then key in the
Dest.
of the call forwarding (please refer to the chapter entitled
Manual or Automatic Line Seizure
starting on page 61). You can activate the forwarding function with
On
,
and deactivate it with
Off
. How many door bells are available and which names they are listed under in the
menu, depends on the type of entrance intercom you have. Consult your system administrator if you have
questions about the configuration of the door bells.
5ƒRemote divert
: This function allows you to configure call forwarding for other users’ call numbers.
Programming call forwarding for a virtual call number is also possible (please refer to
starting on page 69 also). You must have “Call forwarding for other user” authorisation to be able to
do this, otherwise this menu item will not be displayed on your terminal. You can also only configure call
forwarding for users whose terminal has not been blocked for this type of access (users themselves have
authorisation to “Prevent call forwarding by other user”). Please consult your system administrator if you have
any questions about these authorisations.
Enter the internal number that you want to forward or select a number from the telephone book. The rest of
the procedure is the same as configuring the “Call diversion” function (see page 115).
Summary of Contents for Comfort Pro P 300
