138
Features and MenuCards
Programming Keys
Programming Multiple Functions and/or Call Numbers on a Key
Using a Feature Key (Stack / Link)
The LED of a key programmed as a stack has no function. You can use a key programmed as a
Stack
as
follows:
■
Short key press
: The programmed entries are displayed in a selection menu. Select the desired entry
and press the OK key
O
. The programmed call number will be dialled or the programmed function
executed.
■
Long key press
: The MenuCard for the key will be opened. You can now edit the stack’s entries.
g
Long
press the programmable key, then …
P O
select
Stack
or
Link features
and press the OK key.
Z O
Select
Text:
to label the key. If you do not enter a text, the key will be
labelled with the default text (either “Stack” or “Link”). Press the OK key.
P O
Select
Add
and make a selection from the MenuCard shown …
■
Features
to programme a feature key (see
■
Dest.
to programme a destination key (see
starting on page 134); only possible when
programming a stack.
Then press the OK key.
The MenuCard “Stack” or “Link” is shown with the new entry in the list. You
can now add another entry. When all memory locations are occupied you will
hear a negative acknowledgement tone.
O
To end programming, select the
Save
menu item. Then press the OK key.
The programming is saved.
Summary of Contents for Comfort Pro P 300
