T-Comfort 930 DSL, User Manual

Page: 88 / 152

86
PBX Networking Configuration
Configuration
The possible configurations described below can be set up in the Web console using the PBX Configuration:
Trunks menu.
Trunk groups
This is a group of lines of the same type and direction. A line can only be assigned to one trunk group
(bundle).
Example of a PBX network with trunk groups
In the above example, the following trunk groups are configured for PBX 1:
■
Two S
0
lines in a multi-terminal configuration to the network operator which are assigned to the “A” trunk
group.
■
Two S
0
point-to-point connections to PBX 2 which are assigned to the “C” trunk group.
■
One S
0
point-to-point connection to PBX 3 which is assigned to the “E” trunk group.
N
Note: A line or a trunk group cannot be seized directly. It is always performed indirectly
via a route.
A
B
C
E
D
Bundle
PBX 1
PBX 2
PBX 3
Network
operato
r
Trunk line
Point-to-point
connection